| Customization: | Available |
|---|---|
| After-sales Service: | 3 Years |
| Warranty: | 1 Years |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Seal design
1. An exterior shield provides an initial barrier to divert contaminants away from the bearing cavity.
2. A flinger employs the natural centrifugal forces of a rotating idler roll to redirect potential contaminants away from the bearing cavity.
3. A grease-filled, horizontal labyrinth seal impedes progress of ontaminants toward the bearing.
4. A contact lip seal provides additional sealing protection and keeps lubricant in the bearing cavity.
5. A rear seal provides added protection for the grease reservoir.
| Parameter | Description | Value Range / Unit |
| Idler Diameter | Diameter of the roller/idler | 100 - 400 mm |
| Shaft Diameter | Diameter of the shaft | 20 - 100 mm |
| Idler Length | Length of the idler roller | 400 - 2000 mm |
| Load Capacity | Maximum load the idler can support | 100 - 1000 kg |
| Idler Spacing | Distance between idlers on the conveyor | 500 - 2000 mm |
| Bearing Type | Type of bearing used in the idler (e.g., sealed) | Sealed / Open |
| Rotation Speed | Maximum rotational speed of the idler (RPM) | 2000 - 5000 RPM |
| Operating Temperature | Operating temperature range for the idler | -20 to 80°C |
){kind=link}